Cavity fixing

Details
Application areas;
Plates and boards such as B. plasterboard, gypsum fiber, fiber cement, hardboard or chipboard; when fastening objects with the help of chipboard screws, e.g. B. shelves, strips, lamps, curtain rails, cable ducts, etc.
properties
Suitable for board thicknesses from 10 mm
High pull-out values in panel materials
Extended spread wings
Very good anti-twist protection
Optimized locking edges
Perfect fixation in the drill hole
Special fixation band
Temperature resistance: -40 to +80 ° C
Material: polyamide

Processing instructions;
Drill the borehole, press the dowels together and insert them into the borehole using a pre-positioned installation. Screw the screw through the component to be fastened into the dowel. The dowel tip is pulled in by screwing in the screw and the dowel legs fold up on the back wall of the panel. In solid building materials, the dowel expands when the screw is screwed in and holds on to the wall of the borehole due to the contact pressure.

Technical specifications
Dimensions dowel 10 x 50 mm
Drilling Ø 10 mm
Plate thickness 10 mmfor screws Ø 3.5 - 4 mm
Minimum cavity depth 60 mmKHD 10
Plasterboard 12.5 mm 0.73Plasterboard 2 x 12.5 mm 1.04