Thriathlon Drill 42MM SDS MAX

Size: Working length 450 mm, Diameter 42 mm , Overall length 570 mm SDS MAX
Product Code: 9057911

Details;

application areas

• For drilling in (reinforced) concrete, masonry and natural stone

properties

• 3-cutting edge carbide geometry

  • Exactly circular bores, important for dowel fastenings and low-vibration operation for reduced stress on the user

• Short transition from carbide tip to drill spiral

  • Very good removal of drilling dust

• 3 steep, large-volume turns

  • Optimal removal of the drilling dust

  • Counteracts the development of heat in the borehole, lowers the frictional resistance and increases the service life of the drill

• 150 ° point angle with center point

  • Provides improved and faster drilling

• Wear mark on the hard metal

  • Produces true-to-size drill holes

• Shot-peened surface of the drill body

  • Reduces wear on the drill flute

• One-piece, soldered carbide drill head with diameters 16 mm - 28 mm

  • Ensures a very good and direct energy transfer from the hammer drill to the drill

• 4-part soldered carbide drill head with diameters of 30 mm - 42 mm

  • Stresses occurring during drilling can be better absorbed and the load can be better distributed

Processing instructions

• Reinforcement hit: Continue working with reduced pressure. The cutting edge geometry of a rock drill is only suitable for drilling reinforcement to a very limited extent.