Triathlon Drill 16MM SDS PLUS/MAX

Size: Working length 200 mm, Diameter 16 mm, overall length 340 mm SDS-MAX
Product Code: 9057873 

Size:  Working length, 400mm, Diameter, 16 mm Overall length, 470 mm SDS-PLUS
Product Code: 9057856

Size: Working length 400 mm, Diameter 16 mm, Overall length 540 mm SDS-MAX
Product Code: 9057874

Size: Working length  540 mm, Diameter 16 mm, Overall length 610 mm SDS-PLUS
Product Code: 9057857

Size: Working length 1160 mm, Diameter 16 mm, Overall length 1320 mm SDS-PLUS
Product Code: 9057876

Application areas;
For drilling in (reinforced) concrete, masonry and natural stone
properties
3-cutting edge carbide geometry
Exactly circular holes, important for dowel fastenings and low-vibration operation for reduced stress on the user
Short transition from carbide tip to drill spiral
Very good removal of drilling dust
3 steep, large-volume turns
Optimal removal of the drilling dust
Counteracts the development of heat in the borehole, lowers the frictional resistance and increases the service life of the drill
150 ° point angle with centre point
Provides improved and faster drilling
Wear mark on the hard metal
Produces true-to-size drill holes
Shot-peened surface of the drill body
Reduces wear on the drill flute
One-piece, brazed carbide drill head with a diameter of 16 mm - 28 mm
Ensures a very good and direct energy transfer from the hammer drill to the drill
4-part soldered carbide drill head with diameters of 30 mm - 42 mm
Stresses occurring during drilling can be better absorbed and the load can be better distributed

Processing instructions;
Reinforcement hit: Continue working with reduced pressure. The cutting edge geometry of a rock drill is only suitable for drilling reinforcement to a limited extent.

Working length 200 mm
O 16 mm
overall length 340 mm
PU / ST 1